Roof Replacement Before & After Photos

When Marcus from Harwood, North Dakota, noticed his roof showing signs of age and storm damage, he knew it was time to call in the experts. After researching trusted contractors, he contacted Vita Roofing to discuss replacing his roof with a durable metal system. During the inspection, the team confirmed that the existing roof had reached the end of its lifespan. They also noted the steep pitch of the roof, which required special attention in both the estimate and the installation process to ensure a safe and efficient project.

The replacement started with the roof deck and sheathing, the plywood layer that provides structural support. After preparing the deck, the crew installed a protective underlayment designed to act as a barrier against moisture and ice. At the lowest edge of the roof, eave trim was installed over the underlayment to function as a drip edge, guiding water safely away from the structure. With the base layers in place, the installers carefully positioned the seamless metal roofing panels, overlapping each one so the underlap remained beneath the overlap side to ensure water-tight performance.

To finish the system, the Vita Roofing team installed gable and rake trim along the sides of the roof to seal the exposed edges. Butyl tape was used for additional sealing, while foam closure strips were applied with sealant at both the eaves and ridge to prevent insects and rain from entering beneath the panels. The final step was installing the ridge cap across the roof’s peak, followed by securing everything with heavy-duty fasteners placed strategically to withstand strong winds. The completed metal roof not only enhanced Marcus’ home visually but also delivered the long-term durability he needed in North Dakota’s demanding climate.

When Chuck first reached out to Vita Roofing, he wasn’t just looking for a new roof; he was looking for peace of mind. After years of weather wear and a few troubling leaks, his steep 9/12, two-story roof had reached the end of its lifespan. From the very first conversation, Vita Roofing focused on transparency and precision, walking Chuck through a comprehensive estimate and clearly outlining every step of the process. Their goal was simple: deliver a durable, long-lasting solution using high-quality materials and expert craftsmanship.

On installation day, the crew carefully set up tarps around the home to protect landscaping and contain debris before removing the old roofing system down to the decking. After a full decking inspection, any soft or rotten OSB, CDX, and 1x6 boards were replaced with new 7/16" OSB sheathing. To fortify the roof against the elements, they installed two rows of ice and water shield along the eaves and one row in the valleys, followed by synthetic underlayment across the remaining surface. Aluminum 1-3/4" T-style drip edge was placed along the perimeter to ensure proper water runoff.

The transformation was completed with IKO Dynasty Class 3 Impact Rated shingles, featuring built-in algae resistance, an upgraded tar strip, reinforced nailing strip, and increased thickness for superior durability. Starter strips were installed on all rakes and eaves, ring shank coil nails were used for higher wind resistance, and plastic cap nails secured the underlayment. The crew installed new pipe boots, flashings, OmniRoll ridge venting for optimal airflow, and heavyweight IKO Hip & Ridge shingles for long-lasting performance. After detailed cleanup and a 15-yard dumpster haul-away, including chimney removal, Chuck’s home didn’t just look better; it was built to withstand years of harsh weather ahead.

Our professional crew recently completed a full roof replacement using IKO Class 3 Impact Rated Dynasty Shingles in Frostone Grey, delivering both superior durability and a fresh, modern look for Cordell, a local Fargo homeonwer. Before the work began, we set up protective tarps to safeguard landscaping, siding, and other ground-level structures from debris. The existing roofing system was removed down to the decking, where we performed a thorough inspection to identify and replace any soft or rotten boards. This careful preparation ensured a strong, lasting foundation for the new roof.

To provide maximum weather protection, we installed two rows of Sealoron XT Ice and Water Shield along all eaves and one row up each valley, plus Sealoron XT Deck Tape on all decking seams. The remaining surface was covered with Velora One Synthetic Underlayment, offering enhanced water resistance and durability. For finishing touches, we added aluminum drip edge around the entire perimeter, seam-taped the eave edges, installed starter shingles along rakes and eaves, and flashed all penetrations to prevent leaks. Proper attic venting was also incorporated to promote healthy airflow and extend the roof’s lifespan.

For the finishing detail, we installed IKO Hip & Ridge shingles, which are made from a resilient inorganic glass base and coated with weather-resistant asphalt. These pre-tapered, three-piece shingles are surfaced with ceramic-colored granules, protecting the roof from ultraviolet damage while adding a clean, refined appearance. Once the installation was complete, our team performed a meticulous cleanup, leaving the property in pristine condition. The result is a beautiful, impact-resistant roofing system built to withstand the elements for years to come.

Our team at Vita Roofing recently completed a full roof replacement for Lloyd, a homeowner in Fargo, ND, whose property had sustained storm damage from previous severe weather. After years of battling high winds and heavy storms, his old roof was no longer offering the protection it should, making a full asphalt shingle replacement the best solution.

To begin the project, we carefully set up tarps around the property to safeguard landscaping and structures while ensuring all debris was contained during the tear-off. The old roofing system was completely removed down to the decking, where we performed a full inspection and replaced any soft or rotted sections to create a solid foundation.

For maximum protection, we installed two rows of Sealoron XT Ice and Water along all eaves and one row up the valleys, followed by Sealoron XT Deck Tape on every decking seam. The rest of the roof was covered with Velora One Synthetic Underlayment, creating a durable, moisture-resistant barrier. To guide water safely off the roof, a 1-3/4" T-Style Aluminum Drip Edge was added around the perimeter, and we applied seam tape to the drip edge along the eaves for added defense. Starter shingles were then installed on all rakes and eaves to prepare the roof for its new finish.

Lloyd selected IKO Dynasty Shingles, a premium asphalt shingle known for its Class 3 Impact Resistance, built-in algae resistance, and upgraded tar and nailing strips for superior holding power. These shingles are also thicker than standard designs, giving Lloyd’s home added strength against future storms, a critical upgrade for the Fargo area. Once the shingles were secured, our crew added all necessary penetration flashings, proper venting, and finished the project with a clean installation of hip and ridge caps. We wrapped up with a thorough, detailed cleanup, leaving Lloyd with a roof that not only restores his home after storm damage but also provides lasting peace of mind for the years ahead.